TOURNSTILE 4 WINGS DOUBLE FULL-HEIGHT PAINTED OR INOX T-2500D
T-2500D Double fullheight turnstile is designed to provide higher level of security for locations requiring strict access control, even without security staff on the site. While it is securing the premises, it is totally safe for the users at the same time.
T2500D Double can be installed in the entrance of construction sites, factories, stadiums, ministries, prisons and any locations where security is a high priority.
-
SPECIFICATIONS
Control /Operation Voltage :
24VDC +-%20
Power Consumption :
30W
Tripod Locking :
With 24 V DC selenoids; lock when the selenoids are pulled.
Tripod Position Dedection :
Direction of the tripod position with two microswitches.
Motion Control :
When the cycle starts to one direction, the reverse is blocked and after a half turn the rest of the cycle is completed, automatically and smoothly by a hydraulic shock absorber.
Installation :
Simple & easy installation
Operation Temperature :
- 20° C - + 70° C
Indicators :
LED on both sides
Dimensions :
1320x2118x2269 mm
Weight :
500-550 Kg
Optional Accesories :
Remote control, button unit,card reader,biometric reader.
T-2500DRelated Products
Manufacturer: OZAK
Single turnstyle with 2mm stainless steel coating. Hydraulic, silent immobilisation and vibration absorbing system.
It has 3 standard 470 mm aluminum bars (available material options: steel, wood, acrylic, painted steel). Locking system, anti-corrosion protection, available for indoor / outdoor installation (with special housing), allows two-way passage (for one person at a time), anti-roll bar, emergency release (from panic button activation or signal fire), authorized passage and intermittent flow for strict control of the incoming. It also has light indications of stop and direction at the top and bottom.
Flow rate min. 12 - max. 30 persons / minute. Operation at temperatures from -17 ° C to + 68 ° C, compatible with all access control systems, operation and metal detecting systems.
Power supply 220V AC / 50Hz, 24-27V DC. Dimensions: 450x1000x300 mm (+ 470mm aluminum bar), Weight: 36 kg.
Optional: Automatic / Manual Emergency Bar Cut, Countermeter (manual or electromechanical), manual control unit (with infrared or cable), earthquake sensor, alarm unit, card readers, computer interface module, dividers, , etc. OZAK...
It has 3 standard 470 mm aluminum bars (available material options: steel, wood, acrylic, painted steel). Locking system, anti-corrosion protection, available for indoor / outdoor installation (with special housing), allows two-way passage (for one person at a time), anti-roll bar, emergency release (from panic button activation or signal fire), authorized passage and intermittent flow for strict control of the incoming. It also has light indications of stop and direction at the top and bottom.
Flow rate min. 12 - max. 30 persons / minute. Operation at temperatures from -17 ° C to + 68 ° C, compatible with all access control systems, operation and metal detecting systems.
Power supply 220V AC / 50Hz, 24-27V DC. Dimensions: 450x1000x300 mm (+ 470mm aluminum bar), Weight: 36 kg.
Optional: Automatic / Manual Emergency Bar Cut, Countermeter (manual or electromechanical), manual control unit (with infrared or cable), earthquake sensor, alarm unit, card readers, computer interface module, dividers, , etc. OZAK...
Manufacturer: OZAK
Stainless steel turnstyle single. 4 standard stainless steel bars, one way passage & countercurrent stop, continuous flow, manual operation, mechanical locking system, dimensions 1100x1100x817 mm, weight: 15 kg. OZAK, MRKT-404Cr....
Manufacturer: OZAK
Two Way Directional Tourney. Adjustable Speed: A 90-degree opening can take between 0.7sec (min) and 1.5sec (max). Power consumption: 0.1 watts in standby mode. It can work in two modes: normally open and normally closed mode. Transit width 500mm. Dimensions: 890x200x1260mm. OZAK...
